How To Repair A Paslode Gas Finish Nailer
eighteen Ga Cordless Li-ion Brad Nailer-1-strip
MANEUVERABLE. PRECISE. LIGHTWEIGHT.
The NEW Paslode 18 Ga Cordless Li-ion Brad Nailer is the ideal nailer for all of your trim projects. This tools has superior access to tight spaces so you are able to fasten in areas that aren't easily accessible. This consequent nailer makes your job easier than ever, driving each nail flush into all types of trim. Finally, weighing 4.25 lbs., this is the lightest Cordless Brad Nailer on the market.
- Made to fit where others tin can't – Reach directly into tighter spaces
- Consistent – Drive each blast flush into all trim for high quality craftmanship
- Lightweight – The lightest Cordless Brad Nailer on the market for reduced fatigue and increased productivity
Where to Purchase
- Product Information
- Related Products
- FAQ'South
Product Data
Specs
Model | IM200Li.ii |
Office # | 918100 |
Weight | iv.25 lbs. |
Nail Capacity | 70 (1 Strip) |
Nail Range | v/eight" - 2" |
Magazine Angle | Straight Collation |
Boom Type | eighteen Ga Chisel Point - Smooth, Galvanized |
Fuel Type | Short Yellow Fuel |
Warranty | 2 Twelvemonth Service Promise; v Year Express Warranty |
Product Documentation
PRODUCT VIDEOS
SERVICE VIDEOS
Related Products
FAQ's
Does Paslode offer tool repair kits?
Paslode offers the post-obit repair kits: - 219305 / Cordless Framing Tune Upward Kit for 900420 (IMCT)
- 219304 / Cordless Trim Melody Upwards Kit for 900600,902000,901000
- 219218 / For OLDER Model 5000 Serial
- 219219 / For LATEST Model 5000 Serial
- 219222 / For 3000 Series
- 219235 / For F350S / 501000
- 219224 / Trigger Valve Repair Kit for 3000, 4000, 5000 Series, F350S
- 219245 / Feeder Claw Repair Kit for P275C, F325C, P350C
- 219379 / Cordless Framing Tune Up Kit for 902200 / 902600 (CF325/CF325Li)
- 219352 / For PF350S / 502000
The kits tin can exist purchased at a sales location nearest you or online:
Paslode Parts Site
Online Paslode dealers
What if my Paslode Cordless Nailer isn't working?
Cheque these 6 things to get your nailer back to work.
ane. Check fuel cell expiration date
2. Check for empty fuel cell by tapping valve upwards against business firm object (look for mist)
3. Battery charge – check for green low-cal
iv. Dirty filter
5. Nails loaded correctly (never use direct nails)
vi. Nail jam – check for operating manual for safety procedures
Does Paslode sell refurbished nailers?
Paslode offers factory-refurbished tools at itwconstructionparts.com. All tools are refurbished by trained Paslode Factory-Service Technicians. 18-carat Paslode replacement parts are used where necessary and tools are cleaned to look like new.
Product Offerings include:
- Factory Refurbished Cordless and Pneumatic nailers
- Replacement Parts
- Tune Upwardly Kits and Accessories for Framing and Trim/End nailers
- Repair Center
How do I order a part online?
Genuine Paslode replacement parts, tune up kits, accessories, and repair service can be purchased online at itwconstructionparts.com.
Does Paslode offer a cleaning kit for the Cordless nailers?
Paslode offers Tune Up kits for Cordless Framing and Trim/Terminate nailers. The kits contain 12 oz of degreaser cleaner; 10 ml of cordless tool oil; air filter; fuel stalk adapter; spark plug; and Tune Up kit instructions. Tune Upwardly kit part numbers: - 219305 / Cordless Framing Tune Up Kit for 900420 (IMCT)
- 219304 / Cordless Trim Melody Upwardly Kit for 900600, 902000, 901000
- 219377 / Cordless Framing Tune Up Kit for 902200 / 902600 (CF325/CF325Li)
- 219409 /Cordless Li-ion Trim Nailer Tune up kit 902400
The kits tin can exist purchased at a sales location nearest yous or online: - Paslode Parts Site
- Paslode Factory Outlet Store
- Online Paslode dealers
What is included with a new Paslode Cordless nailer?
A new Cordless nailer includes the following: - Conveying Case
- Clear Safety Glasses
- Battery Charger
- Rechargeable Battery
- Hex Key
- Owner's Manual
- Tool Reference Guide
Where is the serial number located on a Paslode Cordless nailer?
The serial number is engraved on the motor housing of the nailer. It is on the right side (battery compartment side). The easiest fashion to locate the number is to hold the tool with the battery side up and the nose pointing to your correct. Look approximately 1 inch below the "P" on the Paslode label and toward the handle. On the CF325 it is located below the nose of the nailer. The serial number is 9 or more digits long.
Do I need to oil my cordless nailer?
Your Cordless nailer comes pre-lubricated from the factory. Information technology is not uncommon to see a small amount of oil that seeped out into the case. Considering the fuel contains a small-scale amount of oil, it is non necessary to oil the tool during normal use. The only time the tool should exist oiled is afterward it has been cleaned.
What should I employ to clean my cordless nailer?
Paslode recommends using Paslode Degreaser Cleaner part number 219086S.
Can I use something other than Paslode degreaser cleaner to clean my nailer?
Paslode Degreaser Cleaner is specially formulated for Paslode Cordless and pneumatic nailers.. Other products may damage electrical components, plastic parts, and condom parts. They may also get out a residue which could cause damage to the nailer or injury to the operator of the nailer.
What type of oil should I use after the nailer has been cleaned?
Apply but Paslode Cordless Tool Lubricating Oil function number 401482S. It is specially formulated to withstand the high temperatures generated by Cordless nailers. Using other oils can cause the rapid build-upwards of combustion residue leading to poor nailer performance and more frequent cleanings.
Which fuel cell does my Cordless nailer use?
In full general, fuel cells with Crimson labeling are for Framing nailers and fuel cells with Xanthous labeling are for Trim/Finish nailers and Staplers. - Framing Nailer – CF325 Framing nailer (part # 902200) and CF325 Li ion ((902600) => QuickLode Fuel Cells (816008)
- Older Framing nailer (function # 900420, 404400, 404600 or 900129) => Red Fuel Cells (role # 816000 or 816050)
- 16ga Angled End nailer (role # 902400) => Quickload Trim fuel (office #816007)
- 16ga Angled Finish nailer (role # 900600) => Brusque Yellow Fuel Cells (office # 650039)16ga Straight Stop nailer (part # 902000) => Curt Yellow Fuel Cells (part # 650039)
- Older model 16ga Directly Finish Nailer (office # 900400 or 900105) => Tall Yellow Fuel Cells (part # 816001)
- 18ga Brad nailer (part # 901000) => Brusk Yellow Fuel Cells (part # 650039)
- 16ga Stapler (part # 900078) => Tall Yellow Fuel Cells (part # 816001)
Do fuel cells have a shelf life?
Fuel cells have a "Best Used By" date printed on the bottom of the can. A fuel cell will often work beyond that date, simply if a tool starts to work intermittently it could be because the fuel cell has expired. An expired fuel cell has lost enough internal pressure to dethrone its functioning.
We recommend ownership only enough fuel to complete the job. E'er check the date on the bottom of the can earlier purchasing or using a fuel cell to ensure it is non by the best used by date.
Volition other brands of nails work in my Paslode nailer?
Paslode nailers and fasteners are engineered to piece of work together as a system. Other brands of nails may non be designed or manufactured to the same specifications or quality standards as Paslode. Using nails that do not meet Paslode'southward specification may crusade impairment to the tool and injury to the operator or bystanders, and may void warranty.
Can I apply other brands of fuel in my Cordless nailer?
Paslode fuel is formulated for Paslode Cordless nailers. Using other brands of fuel may harm your tool or increase how often it needs serviced.
How long does information technology take to charge a battery?
A new battery will take up to 2 hours to fully charge. A partially discharged battery will take between 5 minutes and 2 hours to fully charge depending on the corporeality of discharge.
How many fasteners can be driven with a fully charged battery?
On average a fully charged battery will drive 4,000 fasteners before needing to be recharged.
Practise I need to do anything special to operate the nailers in cold temperatures?
The nailers will perform better in temperatures above 32 degrees Fahrenheit. If you plan on using the nailers below 32F they should be warmed up before use (such as placing them in the cab of a truck while driving to work). Fuel cells can be warmed by placing them in an inside coat pocket. Never place the tool or fuel in the vicinity of a burn down or an open heating element.
Are Cordless nailers affected past altitude?
Cordless nailers volition not piece of work well higher up an pinnacle of five,000 anxiety.
The nailer fires only no boom is beingness driven. What causes this?
There are several things that could cause a nailer to "blank burn down". - If your tool does not have a lockout, check that you lot haven't run out of fasteners
- There may exist a boom jam preventing the fasteners from moving forwards. For data on clearing a nail jam click on "Products" at the pinnacle of this page, select your nailer and and then select the Owner's Manual PDF Download for your nailer. This information is typically establish toward the back of the manual. Y'all can too check the operations manual that came with your tool.
- Cordless nailers may require cleaning. If the tool has driven x,000 nails or more, it may crave cleaning.
When I fire the Cordless nailer it makes a "POOF" sound. What is causing that?
This can be caused past several things, but a blast jam is the most common. Remove the fuel and battery so clear the jammed blast(s) from the tool. If the driver bract is in the down position the tool will not fire. With the fuel and bombardment removed from the tool, push the driver blade all the mode up into the tool and test the tool.
How do I remove a jammed smash from a Cordless Framing nailer?
First remove the fuel, battery and the remaining nails in the mag. Using the five/32 hex fundamental, remove the 2 screws on either side of the piece of work contact. Next grab hold of the work contact with i paw and the bottom of the magazine with the other. Pull the two abroad from each other and the magazine volition separate from the nose. This will let the jammed smash to fall out. Inspect the driver blade and push information technology back up into the tool. Install the two nose screws.
For information click on "Products" at the meridian of this page, select your nailer and then select the Owner's Manual PDF Download for your nailer.
The light on the handle of my Cordless nailer is flashing red and light-green. What does that hateful?
The nailer'due south electrical arrangement has gone into overload protection. In that location may be something wrong with the fan motor or the wires going to the fan motor. Remove the battery, fuel and nails. Side by side remove the cap and grill to inspect the reddish and black fan motor wires. If the wires are pinched or cleaved, that may be the problem.
What does information technology mean when the lights on the charger flash scarlet and green?
Information technology is normal for the lights on the charger to flash red/dark-green for upwardly to twenty minutes. The charger is slowly building the charge in the battery until the bombardment is able to accept the full output of the charger. This protects the battery and increases the life of the bombardment. If the lights continue to flash cherry-red/green later on 20 minutes but go to a steady green when the battery is removed, information technology is likely there is a problem with the battery.
How do I notice a Paslode Authorized Service Center?
To locate your nearest service location, click on "Service and Retail Locator" at the top of the page and then enter your zippo code. Paslode recommends that tools needing service be repaired through your local Mill Authorized Service Network.
How To Repair A Paslode Gas Finish Nailer,
Source: https://www.paslode.com/products/tools/18-ga-cordless-li-ion-brad-nailer-1-strip-20210401
Posted by: howardhise1964.blogspot.com
0 Response to "How To Repair A Paslode Gas Finish Nailer"
Post a Comment